Versioning Software


When you’re writing a piece of software, whether it’s a library or an application, one of the things that you’ll need to decide is how you’re going to version that software. The most popular way to version software is using SemVer or something that looks roughly similar to it, if not explicitly that. A small, but not insignificant, number of projects buck the trend and instead use some form of a date based version, dubbed CalVer by Mahmoud Hashemi.

The general idea behind SemVer is that you communicate how large of a change you intended a particular release to be from a previous release. If there are only bugfixes? Simple! Just increase X.Y.Z+1. Add a new feature? That’s great! You want X.Y+1.0. Break something that will require users to change how they’re doing something? Sad, but you want X+1.0.0. By communicating in your version number what impact you intended to have, you can tell users how much effort they can hopefully expect to expend upgrading to that library.

Meanwhile, minor updates break software all over the world. — Hynek

The arguments for CalVer generally fall along the line that because SemVer is imperfect at describing if a particular change will break someone upgrading the software, that we should instead throw it out and replace it with something that doesn’t purport to tell us that information. The sad fact of life is that no matter how careful you are, the more popular your library is the more likely it is that any change is going to break someone 1. Another argument against SemVer is that SemVer “punishes” fast moving libraries by forcing them to increase their major version regularly which causes people to judge that project derisively. The argument is that CalVer removes this burden, allowing projects to iterate without fear of judgement for their version number.

SemVer is nothing but lies!

Throne of Lies

SemVer encodes intent into the version number and uses that as a way for the project to communicate that intent to its users. However, it cannot do this perfectly, even ignoring the case of non-public API which is not covered by SemVer at all 2. Since this information is often inaccurate, it cannot be trusted and you must rely on something else to tell you what the impact of upgrading will be.

Often the first thing that people will point to is the change log that many projects keep. Assuming that the project keeps a good and detailed changelog, this will tell you what the impact upgrading will be. However, this falls into the same problem as before, while a change log is more descriptive, it still only tells you what changes (or breakages) a project intended to make, it doesn’t go into any detail about unintended consequences of changes made. Ultimately, a change log’s accuracy is no different than that of the version itself, it is just (hopefully!) more detailed.

It is true that by adding more detail an end user, who is familar with how they are using a particular piece of software 3, will get a better idea of what impact an upgrade is going to have on them. If we take this idea to it’s logical conclusion, than we shouldn’t publish change logs either, since they are a lossy encoding of the real changes between two versions, and instead we should just publish a diff and expect everyone to read that 4. After all, more detail is better right?

Fundamentally, any indicator of change that isn’t a full diff is just a lossy encoding of that diff. How much detail you’re willing to lose when evaluating whether to upgrade is going to depend greatly on how important that particular library is to your application. On one application I work on, I just blindly upgrade the raven dependencies regardless of what its version is — It doesn’t have much of an API of it’s own (as I use it, via logging) so there is little chance for it to break. On another project I work on, I look at the full diff between two versions of requests before upgrading it, because we interact pretty closely with it, even touching some internal pieces, and it’s unlikely that anything but a full diff will have enough detail.

Encoding this information in the version is just an extremely lossy, but very fast to parse and interpret, means of communicating this information. It makes it easy for someone to get an idea how much work upgrading the library is likely to be.

The elephant in the room is that no matter what level of detail you give, even a full diff, there really is no way to tell if something is going to break you other than trying it out and see what breaks, hopefully via automated testing. While proponents of CalVer tend to use this as evidence of SemVer’s failing, I don’t believe that to be the case. If I see something has bumped only as a micro version, indicating the project intends this to break nothing but only fix bugs, then I might do a quick version bump in my downtime between other activities without investigating too much further into what exactly changed. If instead, I see a major version bump, I’ll take a look at the changelog to see what changed and I’ll dedicate more time to investigating what changed and, depending on what did change, carve out more time to actually migrate to the newer version.

At the end of the day, I’ll still rely on the tests to tell me if something actually broke in production, but I’ll use the information available to me to determine how much investigation I’m likely to need to do and how painful of an upgrade I might be looking at. If all I’m given is a CalVer style version then I’m forced to either dedicate more time to investigate each version, or to blindly attempt to upgrade and hope for the best, or to assume that every change is a breaking change and hold off on upgrading until I have time to fix any breakages that might occur.

Your version is what?

I’m Judging You

Another major argument is that people inherently judge a project based on what it’s version number is. They’ll implicitly assume that foo 2.0 is better than bar 1.0 (and frob 3.0 is better still) because the version numbers are higher. However, there is a limit to this, if you go too high too quickly, people assume your project is unstable and shouldn’t really be used, even if the reason that your project is so high is because you removed some tiny edge cases that nobody actually used and didn’t actually impact many people, if any, at all.

These are two different expressions of the same thing. The first is that people will look down on a project for not having a high enough version compared to its competitors. While it’s true that some people will do this, I don’t believe that it is a significant reason to throw away the communication benefits of your version number. Instead of focusing on promoting a “2.0” release, try giving your release a code name (or a marketing name) and promoting that instead. Ultimately though, no matter what you do, people who judge a project as inferior because of something as shallow as “smaller version number” will find some other, equally shallow, reason to pick between projects.

The other side of this is a bit different. When you have a large major version, like 42.0.0, people assume that your library is not stable and that you regularly break compatibility and if you follow SemVer strictly, it does actually mean that you regularly break compatibility.

I see two general cases that this happens. The first of these is what I tend to think of as a true positive. A project that does routinely break it’s public API in meaningful ways that make every major version require end users to adjust their use of your library. While every project is free to choose whatever compatibility policy they want, I view this as a generally reasonable outcome. In parenting there is the concept of a “Natural Consequence”, which are consequences that are the inevitable result of a child’s own choices. While developers are often not (but sometimes are!) children, the same idea follows, if people who you want to use your software value stability and compatibility over constant changes, then it is an inevitable result that they are going to view such a project negatively. The version number isn’t the problem, it is just honestly describing how the project is maintained, the problem is a mismatch between what the user’s and the authors want and are willing to accept/promise.

The other side of this, is that strictly adhereing to SemVer means that any change to the public API which is not backwards compatible requires bumping a major version. This means that if you remove some function that nobody actually uses 5 you need to increase your major version. Do it again and you need to increase your major version again. Do this enough times, for even very small changes and you can quickly get into a large version number 6 and people will assume that you’re the kind of project that doesn’t value stability. In this case, this is a false positive for the “stability” test, because the reality is that your project is actually quite stable.

For these projects, I think that the solution isn’t exactly clear because it depends on exactly what they’re doing. In some cases, it’s trivial to maintain compatibility, for example the argument to a function had a typo in the name, so you can instead just accept both names (and likely error if both are provided). In other cases, I think it is best to just bunch up a bunch of these smaller, minor improvments and land them at once or grouped with other, more major changes. Finally, it’s sometimes better to follow the “spirit” of SemVer rather than the letter of SemVer, if you know that nobody is using something (perhaps because it never actually worked!) then removing it in a less than major version bump may be reasonable.

So I should use SemVer then?

The code is more like guidelines, rather than actual rules

I believe that projects should generally default to SemVer-ish, following the spirit of the documentation rather than the letter of the specification. Your version number is a means of communicating to your end users, and nobody knows what sort of changes are most important to reflect in your version number more than the people who are actually involved with the project.

I do believe it is important to call out one particular section from the SemVer 2.0 FAQ that I think doesn’t get enough attention:

If your software is being used in production, it should probably already be 1.0.0. If you have a stable API on which users have come to depend, you should be 1.0.0. If you’re worrying a lot about backwards compatibility, you should probably already be 1.0.0.

Just because SemVer allows you to make breaking changes in a 0.X+1.0 does not mean that you should just hold out with a 0.X version number as long as possible until you think the software is “perfect” and “deserving” of a 1.0 release. Any software that you expect or know that users are using in production should almost certainly be a 1.0 already and if it isn’t, should get a 1.0 release in the near future.

There are however, cases where I see a CalVer based version being superior, but those are certainly the exception rather than the rule in my opinion. Cases such as:

  • You’re tracking something that is already versioned using dates or for which the version number can only really be described as a point in time release. The pytz is a good example of both of these cases, the Olson TZ database is versioned using a date based scheme and the information that it is providing is best represented as a snapshot of the state of what timezones were like at a particular poin in time.

  • Your project is going to be breaking compatibility in every release and you do not want to make any promises of compatibility. You should still document this fact in your README, but if there’s no promise of compatibility between releases, then there’s no information to be communicated in the version number.

  • Your project is never going to intentionally breaking compatibility in a release, and you strive to always maintain compatibility. Projects can always 7 just use the latest version of your software. Your changes will only ever be additive, and if you need to change your API, you’ll do something like leave the old API intact, and add a new API with the new semantics.

At the end of the day, the most important, but often overlooked, aspect of the version is that one of it’s primary purposes is to communicate with the end users of the software. It’s up to the project what information is most important to their end users that it deserves to be communicated through the version number, though I would suggest that for most projects, SemVer-ish is likely to be best suited.


  1. The always great, Randall Munroe has succinctly pointed this out in xkcd: Workflow↩︎

  2. A lot of the times, breakage that comes from upgrading comes from end users relying on something which isn’t part of the project’s public API, whether knowingly or because they had different assumptions about what was public than the project author(s) did. ↩︎

  3. It’s important to note that this really only holds true if you’re aware of what API (programatic, CLI, or any other type) is being depended on and what assumptions are being made about that API. A consumer of say, setuptools might see a line in the change log like:

    Dropped support for builds with Pyrex. Only Cython is supported.

    And have no idea what that means, do they install any projects that use Pyrex? How do they determine that? Your average end user is unlikely to have any idea what the impact of dropping Pyrex is. However, someone who is using Pyrex (or knows that a project is) will immediately see that their use case is no longer supported. ↩︎

  4. You might think that I am joking here, but I know people who argue that version numbers should just be a serial number, and change logs should just be a diff between this version and the last. ↩︎

  5. Though I would ask how you know that nobody is using it, but for the sake of argument we’ll pretend that you do, or atleast are relatively sure that nobody is using it. ↩︎

  6. For example, setuptools is at the time of writing, up to the major version of 20, even though the vast bulk of those breaking changes were very minor edge cases. ↩︎

  7. “Always”, in so much as it is possible to ever promise anything with regards to compatibility in software. ↩︎